Regarding the introduction of graphene heating film, I will introduce some internal information to you today. Graphene heating film is a special conductive carbon paste ink. It is a mixture of dozens of rare metal elements (including graphene components). The flow bar is formed by hot pressing in two layers of insulating translucent polyester film through a variety of processes. After these processes are prepared, the safety performance of the graphene heating film can be guaranteed. Specifically, from the following aspects, where is the security? 　　First of all, graphene plus heating film has the characteristics of self-limiting temperature, which can avoid fusion and combustion problems caused by local overheating. Even if the temperature controller fails, the graphene heating film will not overheat locally, thus ensuring the safety of use. 　　Secondly, the graphene heating film adopts an imported screen printing machine, and the printing accuracy is very high, reaching the international advanced level. The power error between the membrane and the membrane is less than two percentage points, and the unevenness of the membrane itself will not cause a fire accident. 　　 Third, in the design process, award-winning patented technology is used to make the link more secure and avoid virtual connections. 　　 Fourth, the material is made of aerospace-grade PET material, with good electrical insulation, long service life, and a width of 0.338mm. Compared with the ordinary electric heating film of 0.25mm, it can hold a larger current and avoid the fusing problem of current overload. After the graphene heating film is energized, the 8-14 micron far-infrared light is tested by the national authority and is harmless to the human body. The heating method of the graphene heating film is to transfer most of the heat to the room through radiation. It not only heats the air, but also First heat the murals, floors, homes, etc. in the room. Then, dense objects radiate radiant heat through these objects, thereby increasing the indoor temperature naturally and uniformly.

1. Environmental protection: Graphene heater adopts electric heating, no harmful gas or residue emission, clean and sanitary, silent operation, gentle heating, no noise, no radiation, no peculiar smell, no oxygen consumption, no oil, fresh and practical. 2. More humane: Graphene heater separates heating from water and electricity. Its working principle is to use international technology graphene stainless steel heating element as an electrothermal conversion system, using electrical energy as energy to convert it into heat energy. Meet various types of room heating. 3. On-demand heating: Central heating is basically charged according to the heating area, and graphene heaters are relatively flexible. It can be turned on at any time, the temperature is adjustable, convenient and intelligent, and can better meet the needs of different groups of people. Electric heater products have always been restricted by power, and the effect cannot be achieved if the power is small. Too much power means that the cost has increased significantly, and the matching will become more complicated. In order to solve this problem, Nuanfeng Electric's graphene heater products have taken a new path and adopted a new technical solution. The heat dissipation area is coated with graphene, and the thermal conductivity of graphene is used to effectively improve the heat dissipation efficiency, while ensuring the condition of the heating element. Bottom, further improve the heat exchange speed, to achieve the effect of rapid heating. Graphene is a single layer of carbon atom surface material exfoliated from graphite material, which is a two-dimensional structure of carbon. The thickness of this graphite crystal film is only 0.335 nanometers. 200,000 pieces of film are stacked together, only as thick as one hair. It was discovered in 2004 by the team of Kostyanovosev and Andre Geim at the University of Manchester. The emergence of graphene triggered a global research boom. It is not only the thinner among the known materials, but also very strong and tough; as a simple substance, it transports electrons faster than known conductors at room temperature. Nowadays, the application of graphene has been very extensive, such as: graphene battery, graphene electric heating film and other products. However, graphene batteries have been popular for many years but there is no good solution, and they have not been popularized. Graphene electric heating film has been quite mature in graphene products and has been used in the electric heater industry by many companies. The full-featured graphene heater is the best among many heaters. When working, it can release negative ions to purify the air, and the unique antibacterial net can kill bacteria and viruses in the air. This is equivalent to giving you an extra air purifier. Graphene can make the room heat up quickly, it also has a humidification function, and the waterproof function allows you to use it in the bathroom freely. Humanized safety measures such as dumping automatic power off, overheating protection, child lock, etc., let you use it with peace of mind. Graphene heaters are indeed your best choice.

There are different classifications of heaters, each with its own advantages and disadvantages. What are the advantages and disadvantages of heaters? 　　 1. The advantages and disadvantages of electric heaters The advantage of 　　 electric heater is electric energy, which uses electric energy to heat air conditioners or domestic water for heating. The heating speed is fast, the volume is relatively small, there is no noise, and the installation is convenient. It is a new product integrating some domestic heating equipment. The disadvantage of electric heaters is that they consume a lot of electricity. Ordinary residences use 25-35 degrees of electricity a day, and the cost performance is average. It is a relatively small heating boiler. 　　 2. Advantages and disadvantages of fuel heaters The advantage of 　　 oil-fired heating stove is that it relies on burning fuel to provide heat. It is relatively light, easy to use and operate, and its fuel consumption is not high. The disadvantage of the fuel heater is that this fuel heater is generally used in the industrial field. Although they are also used in the home field, they have just emerged in the market and are immature, and are generally not used as home heating equipment. 　　 3. Advantages and disadvantages of gas heaters The advantage of 　　 gas heater is that it is healthy, fast, more stable, and the amount of heat released is also constant. Users can flexibly adjust the heating temperature according to their needs, so as to avoid central heating, energy loss and other problems. It integrates heating and domestic hot water. Gas heaters are like heat sources in the home and can provide heating and domestic hot water. The disadvantage of gas heaters is that they are noisy in daily use and have certain pollution problems. Some imported gas heating stoves are more expensive and are not suitable for households with ordinary incomes.

In winter, both the south and the north are afraid that the indoor temperature is too low. If you want to fight the cold, you can't do without the support of heating equipment. Although many homes have installed air conditioners, in addition to high power and high power consumption, since air conditioners cannot be moved, they also have great limitations. Electric heaters are naturally the best choice for fighting cold. Not only is the price much lower than the air conditioner, but it is also easy to move, consumes less power, and is suitable for various environments. 　　 With the development of science and technology, the technology of electric heaters has also undergone earth-shaking changes. Traditional fuel oil heaters have declined, and new graphene heating heaters have begun to spread, with a good reputation. And it has good sales. A graphene heater is now recommended. Judging from the product promotion, the quality of this heater is really good. The graphene heater is very impressive. Compared with the traditional oil heater, this graphene heater can be said to be more compact. The body is light and thin, only 780*216*526mm, and the weight is only 1.5kg. It does not take up too much space and it is very convenient to store. 　　 is superior to traditional oil-cooled electric heaters in terms of heating effect. This is completely based on the new graphene heating technology, which not only heats up quickly, but also has a very significant heat conduction effect. The thermal conductivity of the graphene coating can reach 5300W/mK, which is about 10 times higher than the effect of copper-aluminum materials. It can promote heat radiation and heat dissipation more quickly, and quickly bring about the effect of heating up the environment. 　　The heating element also adopts the innovative structure of GFM. The heat dissipation area of ??this structure can reach 7116c㎡, which is more than twice the heat dissipation area of ??the heater of the same level, and the structure of this innovative GFM structure naturally has a larger heat dissipation area when dissipating heat, and the heat dissipation effect can be increased by more than 48% , Allowing you to feel the temperature rise while turning on. 　　 In terms of details, the graphene heater is also very user-friendly, equipped with a folding clothes rail, which can dry clothes while heating. The simple knob design, the on/off + temperature adjustment status is clear at a glance, even the elderly at home can use it without barriers, and multiple safety protections also prevent the graphene heater from overheating or tipping and causing safety accidents.

One, save materials. The traditional heating pipe network and terminal use many auxiliary materials such as steel, copper and other metals, plastics and other materials. The graphene electric heating film heating system can save 10 kilograms of pipes and 10 kilograms of steel pipes per square meter. 　　Second, energy saving. The energy saving of graphene electric floor heating system is mainly reflected in the following three aspects: 1. Building energy saving. The graphene electric floor heating system requires that the residence must meet the construction quality standards before installation, which is saving and saving. 2. The product is energy-saving. The electric heating conversion rate of graphene electric floor heating exceeds 90%. Compared with water and floor heating with severe heat loss, the energy consumption is smaller. 3. Behavior energy saving. With graphene electric floor heating, heating can be controlled in time and room, and energy saving is more comprehensive. 　　 Three, environmental protection, graphene electric floor heating uses electricity as the power and the electric heating film as the heating element to directly convert electrical energy into heat, avoiding the pollution of carbon dioxide, sulfur dioxide and other harmful gases emitted in the process of coal heating and combustion. 　　Four, save money. The graphene electric heating film floor heating system saves money in three aspects: 1. Save money. There is no need to build a boiler room, no need to lay a pipe network, no need to store coal, pile of ash, etc., saving land. Graphene electric heating film floor heating is an energy-saving system that can be switched and adjusted at any time. Energy saving means saving money. 　　 Five, safety. The safety of graphene electric heating film floor heating is reflected in the following aspects: 1. Self-protection. The electric heating film is a special waterproof insulation plan, which can operate normally in humid environments and even in water (constant temperature swimming pool) with high safety. 2. Potential safety hazards are eliminated. Due to the aging of the traditional heating pipe network, accidents such as operation, leakage, and large-area heating interruption are prone to occur. Increased instability factors, the use of graphene electric heating film floor heating, as long as the power supply is normal, the heating will not be affected. 3. As the founder of the graphene electric film heating system, the electric film heating system developed by the warm season floor heating has a safe grounding structure. The leakage protection switch can be installed, the safety is higher than the national standard, and the heating is truly worry-free.

　　The electric heater is a process of converting electric energy into heat. It is an excellent electric heating device used for heating, keeping warm and heating the flowing gaseous medium. When the heating medium is under the applied pressure, it is produced during the operation of the electric heating element. The huge heat is evenly taken away by the electric heater, so that the temperature of the heated medium can meet the user's process requirements. Features: The hot air is clean, easy to use, and the equipment is relatively economical. Electric heaters are generally used at home, with small power, small size and light weight. It is one of the very good heating equipment. There are two types of electric heaters on the market, household and factory heaters. Due to different design purposes and use environments, the power varies greatly. Factory heaters require large environmental space. In order to achieve the desired effect, The battery is very large. 　　The information of the household electric heater is as follows: the rated voltage is 220V and the rated power is 2000W, which means that it is much worse than the factory-style electric heater. Because the space used is small, it is natural that the power is small. 　　The principle of electric heater is very simple, but you need to pay special attention when using it. Because electric heater relies on electricity to generate heat, its power is generally higher. Therefore, special attention should be paid to prevent electric shock during use. If necessary, rubber insulating pads or insulating coatings can be installed to prevent electric shock. Generally, electrical heaters have overheating protection devices, which means that if your wires continue to heat to a certain temperature, the overheating device will automatically start and automatically cut off the power supply, so that the wires will not be damaged due to continuous heating. When the temperature drops, the overheating device will automatically separate, so as to automatically switch on the circuit and continue heating. Generally, it is not recommended to turn on the heater for a long time, because once the overheating device fails, it may face the danger of disconnection or even fire. It should also be noted that Protection of electric fans. Because the fan that generates wind is particularly prone to failure in a high temperature environment, this is some necessary precautions for electric heaters.

　During the transition period between autumn and winter, the temperature is always high and low. When inadvertently, children are easy to catch a cold and catch a cold. Children suffer and adults are also tired. In addition, children always like to crawl on the ground, or sit on the ground and play with toys. , In winter, the indoor temperature is low, and children are more likely to catch cold. I recommend a graphene heater with balanced heating. With it, the whole house is warm, and parents can safely play on the carpet for their children. 　　 Many heaters use low-cost quartz or aluminum heating tubes. They feel hot when they are close, but they don’t feel warm when they are far away. But don't let your child get too close to the heater, because you are afraid that you might accidentally burn the child. Graphene heaters provide uniform heating throughout the house, and can also provide 360° thermal cycle heating. Large-scale heating is more comfortable. The heater radiates heat to the surrounding area. With the help of natural air flow, the heat is carried to all corners of the house, even if the child is away. You can feel the warmth farther away, and the heating is safe and comfortable. This heater will run with low power consumption when it reaches the preset temperature, reduce energy consumption, use low power, and is very energy-saving. 　　 Children’s respiratory tract is fragile. If they are in a dry and water-deficient environment for a long time, they can easily cause respiratory diseases. However, many heaters on the market use hot air for heating. Long-term heating can easily cause discomfort such as dry limbs and lack of water in the body. The heater does not consume indoor oxygen and moisture when it is running. It is constant humidity and oxygen during heating. It will not cause symptoms such as dry nose and throat and skin dehydration when used for a long time. It can better protect the child’s delicate respiratory tract, which is worth a visit. It is mentioned that the graphene heater has zero noise and zero light source when heating, so there is no need to worry about strong light hurting the eyes, and no need to worry about noise affecting children's sleep. 　　Once winter comes, children's bathing becomes a big problem for novice parents. If you don’t pay attention to it when you take a bath, your child will catch a cold easily, but with graphene heaters, it’s not the same. It has an IP21 waterproof function and is not afraid of splashing water. It can be used in the bathroom. When the child takes a bath, the heater is turned on. The bath is also warm, reducing the chance of catching a cold. There is a flexible rotating universal wheel at the bottom, which can be pushed to every place in the home. It is used in multiple scenes and has higher practicability. The top is a safety and anti-scalding cover. Even if a naughty child accidentally touches it, don’t worry about it. Hot hands, very safe to use, dumping power off, overheating power off, child lock protection, triple safety protection, to protect children intimately.

During the three-day exhibition, our heaters were loved by many cross-border sellers, especially models HT2003-15 and HT2004-15D. Because of their compact size and exquisite design structure, they attracted countless trade sellers and became the first choice. one. We firmly believe that in the new industry and the new economy, we will use high-quality products to help cross-border sellers ride the wind and waves in the cross-border industry and create huge value! 　　 See you again at the Beijing International Heat Ventilation, Air Conditioning, Bathroom and Comfortable Home System Exhibition on the 12th of next month!

　In terms of function, graphene heater has the effect of rapid heating up and heating the whole house. Graphene has very good thermal conductivity, which can effectively reduce heat loss and accelerate the speed of indoor conversion from cold winter to warm spring. It is worth mentioning that on the basis of the excellent heating effect and comfortable experience, the graphene heater is more heart-warming for the design of heating details. In order to allow users to obtain effective heating efficiency in different temperature environments and reduce long waits, the heater is designed with three power levels of 900W, 1300W, and 2200W to achieve the effect of supplementing heat, comfortable heating and rapid heating, without complicated Program, turn the knob to select the suitable gear independently, the heater is easy to understand and operate, and heating is more simple and convenient. 　　At the same time, you can also adjust the temperature control knob to select the appropriate temperature. When the set temperature is reached, the heater will automatically cut off the power to keep it warm, and it will restart heating when the temperature is lower than the set temperature. When it's cold, turn the knob clockwise to increase the temperature, and when it's hot, turn the knob counterclockwise to decrease the temperature. You don't need to think too much, the operation is handy, and there is always the comfortable temperature you want. 　　 Winter clothes are difficult to dry, and towels are more likely to breed bacteria in a humid environment. The heater is equipped with a foldable drying rod for this. Put down the clothes when drying, and put them up when you don’t need them. It does not affect heating. Put a towel or dried wet clothes on the drying pole to assist in drying clothes. The drying pole can also warm clothes in addition to drying clothes. When you get up in the morning and change clothes or after bathing, you will often feel uncomfortable due to cold clothes. Therefore, the clothes can be placed on the clothes drying rod in advance to warm up the upper body. 　　 Regarding the placement of graphene heaters, users can choose to place them on the floor or on the wall. The heater is thin overall and does not take up too much space. It can be placed anywhere on the ground, making it more convenient to move and heat. At the same time, the height of the heater's wind is about the knees of the human body, which is very friendly to warm the legs, and the wall hanging can save space and prevent pets or children in the house from accidentally knocking it over while playing. Due to the higher temperature at the outlet of the heater after running for a period of time, the wall hanging can also effectively avoid accidental touch and burns. In terms of appearance design, the heater is in white and gray as a whole, which is simple and fashionable, and is suitable for a variety of home styles. For families with children, children will inevitably bump into each other when playing indoors. The designer considers safety issues and will The corners of the heater are designed to be rounded, which can effectively prevent knocking injuries.

　　In our lives, not only floor heating and heating can be used for heating, but many household appliances can also be used for heating, such as electric heaters and air conditioners. The properties of electric heaters are similar to air conditioners, but the difference is that electric heaters have no cooling effect. of. There are many types and materials of electric heaters, and silicon crystal heaters are one of them. So what about silicon heaters? 　　1, comfort. The silicon crystal low-temperature radiation heating system is a product with far-infrared low-temperature radiation as the main energy transfer method. The test proves that the human body is in a low-temperature radiation environment, just like being placed in the sun, and the actual temperature of the human body is higher than the indoor air temperature 2-3 ℃. Thereby improving the comfort of the living environment. At the same time, under low-temperature radiation conditions, the convection speed of indoor air is greatly reduced, reducing dust and noise in the room. There are no cold spots and hot spots in the room, and the temperature is balanced, so that there is no feeling of dryness, and the temperature is soft and sun-like. 　　2. Economical silicon crystal heater heats up quickly and generates heat quickly: it can be heated in 5 minutes after power on. The silicon crystal heating plate directly radiates heat to the room, and the temperature rise rate is more than 5 times faster than that of traditional plumbing and heating cables. Due to the realization of household and room heating, the temperature of each room can be adjusted at will according to the temperature and needs, and operating costs can also be saved. In a heating season, the use cost of a national standard residence with a building area of ??100 square meters does not exceed 2,000 yuan, and the daily operating cost is One-third of the air conditioner, less than half of the plumbing and heating cables, is an affordable and affordable new type of heating product with high thermal efficiency. It is currently a product with a high conversion rate of electricity to heat, with a conversion rate of up to 98%. The system has high efficiency. When the room temperature is set to 16°C, it can achieve a heating effect of 18°C. Each degree of room temperature reduction can save 5% of energy. Since the temperature of the surrounding objects in the room is higher than the air temperature, when the heating system is closed for a short period of time, The heat emitted by objects around the room will play a role in keeping the room temperature stable. 　　 3. Easy to install. The silicon crystal heating plate is designed and produced according to the international advanced modular concept, with a reasonable structure and convenient installation. The heating area can be arbitrarily arranged according to your preferences, zoned installation, zoned control, zoned heating; flexible combination, can be installed and combined in any way, without installation area requirements, and does not occupy indoor space. Moreover, it can achieve the effect of decoration and beauty, and the system does not need to be repaired, which saves the maintenance and operating costs required by other heating methods.